Introduction
The Acura Integra is one of those classic cars that has a loyal following because of how athletic it is, how sleek it looks, and how easy it is to modify. It’s important to know how to fit wheels on your car for both performance and safety, whether you’re repairing a classic Integra or improving your current ride. This guide will show you all the many generations of the Acura Integra, from the late 1980s to the most recent models. We’ll explain everything from the sizes of the rims and the patterns of the wheel bolts to the sizes of the tires and the offsets.
We have all the appropriate specs and tips you need right here, whether you want to know what size rims came on a 1993 Integra or you want to put 18s on your 2024 model.
Acura Integra Wheel Fitment Basics
Before we dive into the specifics, let’s clarify the terminology around wheel fitment.
- Wheel Bolt Pattern refers to the arrangement of the bolts on your hub. For example, “4×100” means 4 bolts spaced 100mm apart.
- Rim Size refers to the diameter of the wheel measured in inches (e.g., 15″, 16″, 17″).
- Offset (ET) indicates how far the mounting surface is from the wheel’s centerline. A positive offset pushes the wheel inward; a negative offset brings it outward.
- Center Bore (Hub Bore) is the hole in the center of the wheel that fits over the hub of the car.
- Tire Size is a code like 195/60R14 that describes the tire’s width, sidewall height, and rim diameter.
Getting these elements right is critical. Misfit wheels can lead to poor handling, uneven tire wear, and even safety risks.
Acura Integra I (AV) [1986–1989] Wheel & Tire Specs
The first-generation Integra, which came out in 1986, had small but useful wheel configurations that worked well with its lightweight, front-wheel-drive chassis. It had a 4×100 bolt pattern, which was standard for Honda cars of the time, so it’s not too hard to find aftermarket parts.
Tire sizes like 185/65HR14 and 195/60HR14 were available on rims that were 5.5JJ or 6JJ wide. The center bore was 56.1 mm, and the offset was ET40. These sizes gave it a balanced stance and handling that was right for its day.
One of the best things about the first-gen Integra is how simple it is. Owners often change the wheels to 15 inches to give their cars a more modern look without making the ride worse. You won’t have any serious problems as long as the offset stays near to the original ET40 and the hub bore stays at 56.1 mm.
Wheel Fitment Table: Acura Integra I (1986–1989)
| Model Year | Tire Size | Rim Size | Offset (ET) | Center Bore | Bolt Pattern |
| 1986 | 185/65HR14 86H | 5.5JJx14 ET40 | 40 | 56.1 mm | 4×100 |
| 1986 | 195/60HR14 85H | 5.5JJx14 ET40 | 40 | 56.1 mm | 4×100 |
| 1987-1989 | 195/60HR14 85H | 6JJx14 ET40 | 40 | 56.1 mm | 4×100 |
| 1987-1989 | 195/55VR15 84V | 6JJx15 ET40 | 40 | 56.1 mm | 4×100 |
Acura Integra II (DA/DB) [1990–1993] Wheel & Tire Specs
The second version of the Integra had sharper looks and a better driving experience. It was still easy to fit the wheels. The bolt pattern stayed the same at 4×100, but the sizes of the tires and rims were different.
The tires on this model were 195/60R14 and 195/55R15, and the rims were between 5.5JJ and 6.5JJ wide. The offset stayed at ET45, and the center bore stayed at 56.1 mm. These sizes made the Integra feel more stable while yet being comfortable to ride in.
The second-gen Integra’s ability to change is one of its best features. You can get 15- or even 16-inch wheels as long as the offset stays near to ET45. Some grades also had factory-installed 15-inch choices starting with this generation, which gave the car a sportier look right from the start.
Wheel Fitment Table: Acura Integra II (1990–1993)
| Model Year | Tire Size | Rim Size | Offset (ET) | Center Bore | Bolt Pattern |
| 1990-1991 | 195/60R14 85V | 5.5JJx14 ET45 | 45 | 56.1 mm | 4×100 |
| 1992 | 195/60R14 85V | 6JJx14 ET45 | 45 | 56.1 mm | 4×100 |
| 1992-1993 | 195/55R15 84V | 6JJx15 ET45 | 45 | 56.1 mm | 4×100 |
| 1993 | 195/50R16 84V | 6JJx16 ET45 | 45 | 56.1 mm | 4×100 |
| 1993 | 205/45R16 84V | 6.5JJx16 ET45 | 45 | 56.1 mm | 4×100 |
Acura Integra III (DB/DC) [1994–2001] Wheel & Tire Specs
By the time the third generation came out, the Integra had fully embraced its sporty DNA. The usual wheel size got bigger, which improved performance and looks, but the bolt pattern stayed the same at 4×100.
Many vehicles in this generation came with 15-inch wheels as standard, while some grades even had 16-inch wheels. It became common to see tire sizes like 195/55R15 and 195/50R16. The offset stayed at ET45, and the center bore was still 56.1 mm.
The third-generation Integra Type R versions are worth mentioning. They came with special wheel sets and tighter tolerances for better performance handling, but this chart doesn’t show them. This age likes to make changes to their cars, and owners often push the limits of what will fit, but keeping the offset close to stock makes sure the car can be driven without rubbing.
Wheel Fitment Table: Acura Integra III (1994–2001)
| Model Year | Tire Size | Rim Size | Offset (ET) | Center Bore | Bolt Pattern |
| 1994-1996 | 195/60R14 85H | 5.5JJx14 ET45 | 45 | 56.1 mm | 4×100 |
| 1997-1999 | 195/55R15 84V | 6JJx15 ET45 | 45 | 56.1 mm | 4×100 |
| 2000-2001 | 195/50R16 84V | 6JJx16 ET45 | 45 | 56.1 mm | 4×100 |
Acura Integra IV (DE) [2023–2026] Wheel & Tire Specs
The new Integra, which came out in 2023, made a big splash with its high-end looks and much-needed changes to the fitting requirements. This generation switched to a 5×114.3 bolt pattern, which is the same as what most recent Acuras and Hondas use. It also works with bigger wheel sets that are better for performance.
Now you can choose between 17-inch (215/50R17) and 18-inch (235/40ZR18) wheels. Rim widths can be as wide as 8J and offsets can be as high as ET50. The center bore got a little bigger, up to 64.1 mm. These improvements make the brakes bigger, give the car better grip, and make it easier to drive.
The well defined tire pressure requirements and torque levels are another good thing. Torque is 108 Nm, and the tire pressure is set at 2.2–2.3 bar, depending on the size of the wheel. If you’re sticking with OEM parts or looking at aftermarket options, simply make sure your new wheels fit the bigger bolt pattern and center bore.
Wheel Fitment Table: Acura Integra IV (2023–2026)
| Model Year | Tire Size | Rim Size | Offset (ET) | Center Bore | Bolt Pattern |
| 2023-2026 | 215/50R17 91H | 7Jx17 ET45 | 45 | 64.1 mm | 5×114.3 |
| 2023-2026 | 235/40ZR18 91W | 8Jx18 ET50 | 50 | 64.1 mm | 5×114.3 |
Generational Comparison Table
This is a summary of the wheel specifications for all four models of the Acura Integra. This chart is a quick reference that shows the most important changes and compatibility problems when changing wheels between models.
| Generation | Years | Bolt Pattern | Center Bore | Offset | Typical Rim Size | Tire Sizes |
| Gen I | 1986-1989 | 4×100 | 56.1 mm | ET40 | 14-15″ | 185/65R14, 195/55R15 |
| Gen II | 1990-1993 | 4×100 | 56.1 mm | ET45 | 14-16″ | 195/60R14, 205/45R16 |
| Gen III | 1994-2001 | 4×100 | 56.1 mm | ET45 | 15-16″ | 195/55R15, 195/50R16 |
| Gen IV | 2023-2026 | 5×114.3 | 64.1 mm | ET45-50 | 17-18″ | 215/50R17, 235/40ZR18 |
Choosing Aftermarket Wheels for Your Integra
One of the best things Integra owners can do is get new wheels from a third party. But you have to follow the factory standards or remain very close to them to do it right. There is a perfect fitting range for each generation. Older generations (I-III) work best with 15″ to 16″ rims that have a 4×100 bolt pattern. The current Integra (Gen IV), on the other hand, may safely use wheels up to 19″ if done correctly.
Brands like Enkei, Konig, and BBS make fitments that match Integra standards. When picking up wheels, keep in mind the offset and hub bore. If the offset is too low, the wheels could move too far out. If the center bore doesn’t match, the wheels could vibrate unless you utilize hub-centric rings. Before you finish setting up your wheels, always test-fit them and talk to wheel experts.
FAQs
Can I put 18” wheels on a 90s Integra?
Yes, however it’s not the best idea until you change the suspension and fender clearance. A 16″ wheel is a safer and more comfortable upgrade.
What’s the widest tire I can run on stock suspension?
You may easily run tires up to 205 wide on older versions like Gen II or III without them rubbing. Always check the ride height and wheel offset.
Are all Integra wheels interchangeable across generations?
Not all of them. The bolt pattern is the main thing that sets them apart. The first three generations use 4×100, whereas the fourth generation uses 5×114. 3. Spacers or adapters might work, but they aren’t usually safe.
Conclusion
The Acura Integra has changed a lot over the years, and so have the specs for how its wheels fit. Each model has its own fitment profile, from the 14-inch steelies on the first generation to the 18-inch alloys on the newest model. It’s important to know the specs—bolt pattern, offset, hub bore, and tire size—if you’re fixing an old Integra or changing a new one. If you use measures that work with your Integra, it will look amazing and drive like a dream.
