The Acura Legend, which was made from 1986 to 1995, was very important in making Acura a high-end brand in the U.S. The Legend was popular with vehicle lovers because of its clean design and tuning potential, as well as its sumptuous feel and strong performance. It’s important for safety, looks, and handling to acquire the appropriate wheel fitment, whether you have a first-generation model or a more refined second-generation model. This article tells you all you need to know about the Acura Legend, including the bolt pattern, rim size, hub bore, offset, and tire size for both versions.
Acura Legend Wheel Fitment Overview
When changing or adding wheels, it’s important to know the original and recommended specs to make sure they fit right and drive well. The 1st generations of the Acura Legend, along with many other Honda and Acura cars, utilize the 4×114.3 wheel bolt pattern. The hub bore is 64.1 mm, which lets the wheels fit tightly without shaking.
The size of the rims depends on the year and trim, although they usually range from 15″ to 16″ in the factory setup. Offset ranges are usually between +50 mm and +55 mm. Depending on the model and trim, the factory tires come in sizes like 205/60R15 and 215/55R16.
Many owners get bigger wheels for appearance or performance, but it’s important to keep the right offset and tire diameter so that the wheels don’t rub or the speedometer doesn’t give wrong readings. A lot of people upgrade to 17″ or 18″ wheels, but it’s important to get the correct width and offset to keep the ride smooth and the alignment straight.
Read About: Acura NSX Wheel Fitment Guide
1st Generation Acura Legend (1986–1990) Wheel Specs
Sedan & Coupe Wheel Fitment (1986–1990)
The first-generation Acura Legend has a wheel layout that isn’t very impressive by today’s standards. The factory wheels were 15×6 inches with a bolt pattern of 4×114.3 and a hub bore of 64.1 mm. OEM wheels usually have an offset of +55 mm. The tires were normally 205/60R15, which gave a satisfactory blend of comfort and handling for the period.
Many owners of first-gen Legends choose 16″ or 17″ wheels that are 7″ to 8″ wide and have an offset of +40mm to +45mm. This setup fills out the wheel arches well without lowering the car’s clearance or changing the way the suspension works.
Your speedometer will stay accurate as long as your tires are between 24.6″ and 25″ in diameter. Common improvements include 215/50R16 or 225/45R17 tires. Always make sure that aftermarket wheels fit the hub bore, or install hub-centric rings to keep the wheels from vibrating.
| Year | Center Bore | Bolt Pattern | Lug Nut Thread | OEM Tire Size | OEM Rim Size | OEM Offset Range (mm) | Tire Pressure (Front / Rear, bar) | Aftermarket Wheel Size Range |
| 1986 | 64.1 mm | 4×114.3 | M12 x 1.5 | 195/65HR15 90H | 5.5Jx15 ET50 | 48–52 | 2.1 / 2.1 | 15″–16″ |
| 1987 | 64.1 mm | 4×114.3 | M12 x 1.5 | 205/60HR15 89H | 6Jx15 ET50 | 48–52 | 2.1 / 2.1 | 15″–16″ |
| 1988 | 64.1 mm | 4×114.3 | M12 x 1.5 | 205/55VR16 88V | 6Jx16 ET50 | 48–52 | 2.1 / 2.1 | 16″–17″ |
| 1989 | 64.1 mm | 4×114.3 | M12 x 1.5 | 205/50VR17 87V | 6.5Jx17 ET50 | 48–52 | 2.3 / 2.3 | 17″–18″ |
| 1990 | 64.1 mm | 4×114.3 | M12 x 1.5 | 205/50VR17 87V | 6.5Jx17 ET50 | 48–52 | 2.3 / 2.3 | 17″–18″ |
2nd Generation Acura Legend (1991–1995) Wheel Specs
Sedan Wheel Fitment (1991–1995)
The second-generation Acura Legend saw a small change in the design and performance of its wheels. Depending on the trim, factory rim sizes were usually 15×6.5 inches or 16×6.5 inches. The hub bore was 70.1 mm, and the bolt pattern chnaged at 5×114.3. Most of the time, the offset values were about +55 mm. Most sedans used 205/60R15 or 215/55R16 tires, which made for a smooth and stable ride.
If you want to buy wheels from a third party, 17×7 or 18×8 wheels are good choices as long as the offset is between +40 mm and +45mm. A tire size of 225/45R17 provides your car a sporty look without making it uncomfortable. The sedan’s wheel arches have enough room, but if the wheels are wider than 8.5 inches, you may need to roll the fenders or make other changes to the suspension.
Coupe & GS Trim Wheel Fitment (1991–1995)
The factory gave the Acura Legend coupe, notably the GS version, a more aggressive look. OEM wheels were commonly 16×6.5 inches and came with 215/55R16 tires. The hub bore stayed the same at 70.1 mm, and the bolt pattern stayed the same at 5×114.3. The factory offsets were about +55mm, which is perfect for keeping the handling precise.
Many GS owners change to 17″ or 18″ wheels, with 17×7.5 and 18×8 being two of the most common sizes. Offsets should be between +38mm and +45mm. A tire setup like 235/40R18 gives you a good blend of grip and ride height without any rubbing problems. The coupe’s suspension absorbs modifications better than the sedan’s, but you should still check the clearance, especially if you’re lowering the car.
| Year | Center Bore | Bolt Pattern | Lug Nut Thread | Torque (Nm) | OEM Tire Size | OEM Rim Size | OEM Offset Range (mm) | Tire Pressure (Front / Rear, bar) | Aftermarket Wheel Size Range |
| 1991 | 70.1 mm | 5×114.3 | M12 x 1.5 | Unknown | 205/60VR15 91V | 6Jx15 ET58 | 56–60 | 2.1 / 2.1 | 15″–16″ |
| 1992 | 70.1 mm | 5×114.3 | M12 x 1.5 | Unknown | 215/60VR15 92V | 6.5Jx15 ET65 | 63–67 | 2.1 / 2.1 | 15″–16″ |
| 1993 | 70.1 mm | 5×114.3 | M12 x 1.5 | Unknown | 215/55VR16 91V | 6.5Jx16 ET65 | 63–67 | 2.3 / 2.3 | 16″–17″ |
| 1994 | 70.1 mm | 5×114.3 | M12 x 1.5 | Unknown | 225/50VR16 93V | 7Jx16 ET60 | 63–67 | 2.3 / 2.3 | 16″–17″ |
| 1995 | 70.1 mm | 5×114.3 | M12 x 1.5 | Unknown | 225/45VR17 92V | 7.5Jx17 ET60 | 63–67 | 2.5 / 2.5 | 17″–18″ |
| 1996 | 70.1 mm | 5×114.3 | M12 x 1.5 | Unknown | 235/40ZR18 93W | 8Jx18 ET55 | 63–67 | 2.5 / 2.5 | 18″–19″ |
Bolt Pattern & Lug Nut Specifications
The Acura Legend has a bolt pattern of 5×114.3, which makes it easier to buy aftermarket wheels because this is a common norm for Honda and Acura cars. When buying aftermarket lug nuts or locking nuts, it’s crucial to note that the thread pitch for the lug nuts is M12x1.5.
Most factory lug nuts have a conical seat, so be sure that any new wheels fit this requirement. The right amount of torque to use while tightening lug nuts is between 80 and 90 lb-ft. To keep the brake rotor from warping or the wheel from becoming out of alignment, always torque in a crisscross pattern.
You need hub-centric rings if your new wheels don’t fit the stock hub bore of 64.1 mm/70.1mm. These stop vibrations and ensure that the wheel is centered on the hub. A safe and smooth ride depends on the right lug torque, seat type, and hub fitment.
Hub Bore Size & Offset Guidelines
Both the first and second generations of Acura Legends have hub bore size of 64.1 mm and 70.1mm. When you move to aftermarket wheels, it’s important to match or fit this measurement. Hub-centric rings assist in filling the space and maintaining the wheel centered if the wheel’s bore is bigger. This technique cuts down on vibration and stops uneven tire wear.
Offsets are usually fixed to roughly +55 mm at the factory. When you go aftermarket, a safe range is between +35 mm and +45 mm. If the wheel goes too far out, it could rub against the fenders or suspension parts. If the offsets are too high, the wheel may sit too much inward, which could change how the car handles.
If you stay within the suggested offset range, your wheels will fit flush without changing the way the steering works. It is also very important for keeping the tires in good shape and properly aligned. If you want to lower the car or make the wheels wider, you will need to do even more precise offset calculations. Always test fit before you buy.
Best Tire Size Upgrades for Acura Legend
Choosing the appropriate tire size is just as crucial as the wheels when you upgrade your Acura Legend’s wheels. The factory requirements say to use 205/60R15 or 215/55R16 tires, but you may use 17″ or 18″ wheels with the correct tires to keep the same diameter. This keeps problems with the speedometer and ride height from happening.
Depending on the size of the wheels, popular upgrades are 225/50R16, 225/45R17, or 235/40R18. These tire options keep the same overall diameter but give you more traction and a better look. Wider tires also make the car look sportier and help it stay stable when turning.
Before you buy tires, think about how you drive. Tires with a lower profile, like the 40 or 45 series, handle better but can make the ride less comfortable. Also, be careful about sidewall clearance and don’t set up your car too aggressively unless you plan to change the suspension or fenders. Putting the right size and quality tires on your Acura Legend will make it look and perform better.
Aftermarket Wheel Tips for Acura Legend Owners
One of the easiest ways to make your Acura Legend look better and feel better on the road is to get new wheels. When buying aftermarket wheels, always put quality, fit, and safety ahead of style. The wheels you want should have a 5×114.3 bolt pattern, a hub bore of 64.1 mm (or larger with rings), and an offset between +35mm and +45mm.
Enkei, Konig, XXR, and BBS are among of the most popular wheel brands among Legend fans. For a small improvement, 17×7 or 17×7. Five wheels with 215/50R17 tires are a decent balance. If you want a more aggressive look, 18×8 or 18×8.5 wheels with 235/40R18 tires are a good choice. Just make sure there is enough space between the fenders and the suspension.
You can make your new setup seem better by using lowering springs or coilovers, but be careful of rubbing and alignment problems. After upgrading your wheels, think about getting an alignment to keep your tires in good shape and improve handling.
FAQ’s
Can I install 18″ or 19″ wheels on a Legend?
Yes, a lot of owners move to 18″ wheels without any problems, as long as the offset is right. You can do 19″, but you might need to work on the fender.
Will wheels from an Accord or TL fit my Legend?
They might fit if they have the same 5×114.3 bolt pattern and a similar offset, but you should always check the hub bore and offset first.
Do I need spacers for aftermarket wheels?
You only need spacers if the offset isn’t right or you want a broader stance. For safety, make sure they’re hub-centric.
What’s the max tire width I can run without rubbing?
Most setups can handle tires that are up to 235mm wide without rubbing, but if your car is lowered or has wider wheels, make sure you check the clearance.
Conclusion
If you want to acquire the perfect fit for your wheels, you need to know the specs of your wheels, whether you drive a classic first-gen or a sleek second-gen Acura Legend. Make sure the bolt pattern is 5×114.3 mm, the hub bore is 64.1 mm and 70.1mm, and the offsets are between +35 mm and +55 mm. The perfect setup makes your vehicle look better, feel better, and handle better, whether you desire an OEM-like ride or a personalized look with 18″ wheels.
To avoid problems with your speedometer or clearance, double-check the size of your tires. When you get the right fit for your Acura Legend, it will turn heads and give you a confident ride.
